top of page

Cercle lunaire

Public·9 Membres
Vadim Solovyov
Vadim Solovyov

How to Download and Install Kirisun S780 Programming Software



How to Download and Install Kirisun S780 Programming Software




The Kirisun S780 is a digital UHF radio that supports both analog and digital modes. It has a large color display, a keypad, and various features such as encryption, text messaging, and GPS. To program the Kirisun S780, you need a special programming cable and software.




Kirisun S780 Programming Software Download


Download Zip: https://www.google.com/url?q=https%3A%2F%2Fblltly.com%2F2tKfE4&sa=D&sntz=1&usg=AOvVaw32c3D2-QMUHMpuCUtKDOss



In this article, we will show you how to download and install the Kirisun S780 programming software on your Windows PC, and how to use it to configure your radio.


Step 1: Download the Kirisun S780 Programming Software




The Kirisun S780 programming software is called CPSc V 1.40. It is available for free from various online sources, such as Kumu[^1^], Radioscanner.Ru[^2^], or Kirisun Walkie Talkie Radio[^3^]. You can also contact your local Kirisun dealer or distributor for the software.


To download the software, you need to click on the link of your choice and follow the instructions on the website. You may need to register an account or enter a captcha code to access the download. The software is usually in a ZIP or RAR file that you need to extract to your computer.


Step 2: Install the Kirisun S780 Programming Software




After you have downloaded and extracted the software, you need to install it on your PC. To do this, you need to run the setup.exe file in the folder where you extracted the software. You may need to right-click on the file and choose "Run as administrator" if you have Windows security settings enabled.


Follow the instructions on the screen to complete the installation. You may need to choose a language, accept a license agreement, and select a destination folder. The installation process should take only a few minutes.


Step 3: Connect Your Kirisun S780 Radio to Your PC




Before you can use the programming software, you need to connect your Kirisun S780 radio to your PC using a USB programming cable. The cable has a USB connector on one end and an audio connector on the other. You can buy the cable from Amazon, Ebay, or other online stores.


To connect your radio to your PC, you need to do the following:


  • Turn off your radio and remove the battery.



  • Plug the audio connector of the cable into the accessory port of your radio. Make sure it is firmly inserted.



  • Plug the USB connector of the cable into an available USB port of your PC. You should hear a sound indicating that your PC has recognized the device.



  • Reinstall the battery and turn on your radio.



Step 4: Use the Kirisun S780 Programming Software




After you have connected your radio to your PC, you can launch the programming software by clicking on its icon on your desktop or in your start menu. You should see a window like this:


To use the software, you need to do the following:


  • Select the correct COM port from the drop-down menu at the top left corner of the window. You can check which COM port your cable is using by going to Device Manager on your PC and looking under Ports (COM & LPT).



  • Click on Read Data from Radio button at the top of the window. This will download all the information stored in your radio to your PC. You may need to wait for a few seconds until it is done.



  • Edit any settings that you want to change on your radio. You can use the tabs at the bottom of the window to access different categories of settings, such as General Settings, Channel Settings, Scan Settings, etc. You can also use the buttons at the top of each tab to add, delete, copy, paste, or import channels or groups.



Click on Write Data to Radio button at the top of the e0e6b7cb5c


À propos

Bienvenue sur mon groupe ! Découvrez les autres membres, ou...

Membres

Page de groupe: Groups_SingleGroup
bottom of page