top of page

Cercle du féminin

Public·9 membres

How to Activate VCDS-Lite 1.2 Full Version for Free

How to Activate VCDS-Lite 1.2 Full Version for Free

VCDS-Lite is a diagnostic software for VW/Audi/Seat/Skoda vehicles that works with non-dongle interfaces. It allows you to scan all the control modules for fault codes, read and clear codes, view live data, perform basic settings and adaptations, and more. However, some features are blocked until you register and activate the software.

Vcds lite 12 full registered activated-1

In this article, we will show you how to activate VCDS-Lite 1.2 full version for free, without paying any fees or buying any licenses. This will enable you to access all the functions of the software and enjoy its full potential.

Step 1: Download and Install VCDS-Lite 1.2

The first step is to download and install VCDS-Lite 1.2 on your computer. You can find the download link here[^1^]. The file size is about 6 MB and it is compatible with Windows XP, Vista, 7, 8, and 10. You can also use it on 64-bit operating systems.

After downloading the file, unzip it using a program like WinRAR or 7-Zip. Then run the setup.exe file and follow the instructions to install VCDS-Lite 1.2 on your computer. You may need to restart your computer after the installation.

Step 2: Connect Your Interface to Your Car and Computer

The next step is to connect your interface to your car and computer. You will need a compatible interface that works with VCDS-Lite 1.2, such as a KKL (VAG-COM 409), K+CAN (VAG-COM 704), or HEX-USB (VAG-COM 805) interface. You can find these interfaces online or at your local auto parts store.

Connect one end of the interface cable to your car's OBD-II port, which is usually located under the dashboard on the driver's side. Connect the other end of the cable to your computer's USB port. Make sure your car's ignition is on, but do not start the engine.

Step 3: Find Your Serial Number

The third step is to find your serial number. This is a unique number that VCDS-Lite generates on each computer where it is installed. You will need this number to activate the software.

To find your serial number, open VCDS-Lite on your computer and go to the About screen. You will see a message that says "VCDS-Lite Serial Number:" followed by a series of numbers and letters. This is your serial number.

Copy your serial number by highlighting it with your mouse and right-clicking on it. Then select Copy from the menu that appears. This will copy your serial number to your clipboard, so you can paste it somewhere else.

Step 4: Request an Activation Code

The fourth step is to request an activation code. This is a small file that you need to save on your computer to activate VCDS-Lite 1.2 full version.

To request an activation code, go to this registration form[^1^] and fill out the required fields. You will need to enter your name, email address, country, interface type, and serial number. Paste your serial number by right-clicking on the field and selecting Paste from the menu that appears.

After filling out the form, click on Submit at the bottom of the page. You will receive an email with your activation code within a few minutes or hours, depending on how busy the server is.

Step 5: Save Your Activation Code

The final step is to save your activation code on your computer. You will receive an email with a file attachment named "VCDSLite-ActivationCode.txt". This is your activation code.

Download the file attachment and save it in the same folder where you installed VCDS-Lite 1.2 on your computer. The default location is C:\Program Files\VCDS-Lite\ or C:\Program Files (x86)\VCDS-Lite\ if you are using a 64-bit operating system.

After saving the file, open e0e6b7cb5c

  • À propos

    Bienvenue sur mon groupe ! Découvrez les autres membres, ou...

    Page de groupe: Groups_SingleGroup
    bottom of page